Instructions

01- REVO SMART CUPPING THERAPY DEVICE INTRODUCTION

The ancient healing method of cupping has continuously shown powerful benefits in improving cellular immunity, alleviating pain from knots, and dramatically improving blood flow while reducing cellulite.
Combining this technique with modern therapy modules such as dynamic suctioning, red light therapy, therapeutic heating, and vibrational massaging, we have designed one of the most powerful all-in-one therapy for convenient at-home use.

 

02- SPECIFICATIONS:

The Revo Cup:

  • Standard: 6-Level Intensity
  • Dimensions: 90*90*78mm
  • Battery Life: 3 hours on max
  • Charge Time: 3 hours
  • Rated power: 5W
  • Suction Intensity: up to level 6 intensity (-35 to 0 kPa)
  • Red Light
  • Wavelength: 630-670nmHeat: 100°F - 113°F (38°C - 45°C) 

The Revo Cup Max:

  • Standard: 12-Level Intensity
  • Dimensions: 90*90*78mm
  • Battery Life: 3 hours on max
  • Charge Time: 3 hours
  • Rated power: 5W
  • Suction Intensity: up to level 12 intensity (-60 to 0 kPa)
  • Red Light
  • Wavelength: 630-670nmHeat: 100°F - 113°F (38°C - 50°C) 

03 - Preparation Before Use

  1. It is recommended to clean and moisturize the skin before using the Cup. You can apply essential oils, or any other moisturizer.
  2. Carefully remove and disinfect the transparent cup/tube by rotating it counter-clockwise, then dry it before and after each use.
  3. Tighten and install the transparent tube.

Power/Modes Button

  1. Press and hold for 1 second to turn on your Cup. Each device is equipped with a run time of 20 minutes timing (the timer doesn't show on the 6 gears machine) and automatically shuts down after 20 minutes. (NOTE it is important to only start with a few minutes as a beginner to test skin sensitivity).
  2. To shut your Cup down, press and hold the Power Button.The LCD screen and red light will shut off, indicating that the device is now off. (NOTE: Please be sure to press the Suction Release button prior to shutting off Revo to depressurize the skin for easy removal).
  3. Each device has two modes: Mode I (Deep Negative Pressure Mode): Where the Cup will slowly apply and release pressure in a controlled speed. Mode 2 (Dynamic "Breathing" Mode): where the Cup will dynamically alter between slowly applying pressure and quickly releasing pressure. It is recommended to use Mode 2 when trying to glide the Cup across the skin.
  4. The Cup will default to Mode 1 when powered on. To switch between modes, power on the device and press the Power Button to switch to Mode 2, the screen will display 2 dashes to indicate this mode. Press the Power Button once more to switch back to Mode 1, indicated by 1 dash on the screen.
  5. By default, The Cup will start up on the lowest pressure and heat settings.

Suction/Pressure Intensity Button

  1. Upon powering on Revo, suction intensity will be on level 1 by default.
  2. To switch between the 6 levels of intensity simply press the Suction Intensity Button to increase by 1 level. Each press will reveal the current intensity level on the LCD screen by adding a dash for a short while before switching back to displaying the countdown timer. Same thing for the 12 levels intensity machine and each press will increase it, the display will show each level.
  3. Once you reach level 6/12, the next press will revert the intensity back to level 1.
  4. NOTE: For beginners, it is strongly recommended to start with level 1 intensity for just a few minutes as your skin needs to adapt to cupping therapy. It is also advised to pay close attention during your first few sessions to avoid overworking the skin as you determine your sensitivity tolerance. More advanced users may go up to higher levels for a maximum of 20 minutes on each targeted area, every other day.

Temperature Control Button

  1. Level 2 temperature+ Red Light Therapy is activated by default.
  2. The temperature has 6/12 levels of heat. Each press will reveal the current temperature level on the LCD screen by adding a dash for a short while before switching back to displaying the countdow timer.
  3. Upon reaching level 6/12, the next press will bring the temperature to 0 (effectively shutting off any heat and red light therapy).

Suction Pressure Release Button

Press to release any pressure, the Cup will release any suctioned skin and immediately fall off without any pressure. It will take a few seconds before it releases your skin completely. Please be careful to grab the Cup before you press this button to avoid dropping the device upon suction release.

Cotton Filter

The Cup is designed with a circular cotton filter to catch unwanted particles during use, effectively blocking debris from reaching into the electrical components through the vents. Please carefully clean your the Cup after use and clean your filter after each week of use to maximize reliability. The filter should be replaced only when you feel that the suction of the machine has decreased.

SAFETY PRECAUTIONS!! MAKE SURE YOU READ THE FOLLOWING VERY CAREFULLY

Please read and understand this section to prevent personal injury that may be caused by incorrect operation. Do not use the following medical electronic equipment at the same time as it may cause errors or damage to medical instruments, which can be life threatening.

  1. Implantable medical electronic devices such as a cardiac pacemaker
  2. Life-sustaining medical electronic devices such as artificial hearts and lungs.
  3. Electrocardiographs and other medical electronic instruments.
  4. Patients with other medical implants.
  5. Keep out of reach from children.

Bruising and Blisters

  • Bruising after cupping is normal and a good sign that your therapy is effective and it's bringing toxins up to the skin, however, it is possible that the cup, or any kind of cupping therapy, may form blisters on the skin.Although it is rare, blisters form due to overuse as a beginner (high intensity/prolonged session), negligence to disinfect the skin or the cup prior to use, or simply because your skin type is sensitive to cupping therapy and/or heat.
  • This is why we strongly advise beginners to start off very slowly at low intensity levels, using the cup for just a couple minutes per muscle group to get a good feel for how their skin reacts.
  • Again, blisters are extremely rare but a possibility due to the nature of cupping therapy, please pay close attention to each session and stop using the cup immediately if you feel strong discomfort or blisters forming.

Please do not use the device under the following circumstances to avoid accidents or discomfort:

  1. Patients who are pregnant, menstruating, with a damaged epidermis, varicose veins, and taking drugs.
  2. Patients with infectious diseases, skin sensitivities, and post-operative patients, patients with high fever or critical illness are also prohibited.
  3. Patients with malignant tumor or local damage and ulceration, traumatic fracture, acute suppurative inflammation, skin patients with loss of elasticity.
  4. Patients with abnormal heart, brain nerve, and blood pressure.
  5. Severe neuroticism, convulsion, spasm, and manic anxiety.
  6. Diseases prone to bleeding such as thrombocytopenia, leukemia,
  7. hemophilia, Henoch Schonlein purpura, and other diseases associated with bleeding.
  8. Near the heart, facial features, private parts, or large blood vessels on the body surface.
  9. Patients with skin perception disorder or abnormal skin.
  10. The patient who is being treated by a doctor or feels physically abnormal.
  11. Excessive fatigue, drunkenness, and staying up too late (2 hours before and after meals are also prohibited).
  12. Patients whose skin is allergic to metal and red light.
  13. The device has a heating surface. Hence, the device is not for children who are unable to express their wishes freely or people who are unable to self-manage the device.

Please be advised, our company and associated companies are not liable for any injury caused by the use or misuse of this device. It is always recommended to consult with your physician before using or applying our device or any therapy device onto your body. Your health and satisfaction are our top priority.

Please read and understand this section to prevent personal injury caused by the wrongful operation.

  1. Please use the cup correctly, in accordance with the operating instructions.
  2. When using the cup, the transparent tube should be securely attached to the skin and evenly applied while avoiding contact with wounds and scars.
  3. The transparent tube may cause low-temperature scald or skin strain when used for a long time on sensitive skin, though this is rare. Regardless, please pay attention during use to avoid this.
  4. If you feel unwell when using the cup please stop immediately and consult with you physician.
  5. It is highly recommended that only one user uses the device.
  6. Please turn off and properly disinfect the transparent tube before sharing the cup with another person.
  7. Do not use a notched or damaged transparent tube.
  8. After using this device, redness or ecchymosis may occur, which is a normal reaction to effective cupping therapy and usually subsides within 3-5 days (according to the individual's skin type).
  9. Wear your bruises proudly!
  10. When the cup functions for a long time over a single session, there will be heating on the surface which is normal, just be mindful of your skin's sensitivity.
  11. In case of any abnormality during use, remove it immediately.
  12. Do not use the device while driving.
  13. Do not plug and unplug the USB charging cable with wet hands to prevent electric shock or accidents.
  14. This device contains a lithium battery; please do not disassemble, change, immerse it in water, or throw it into the fire to prevent damage and the device exploding/popping.
  15. After use, the blood vessels on the targeted skin will dilate. You should rest for 45 minutes before bathing.

05.  CLEANING AND MAINTENANCE

Please observe the cleaning and maintenance methods provided below to prolong the service life of the cup

  1. Wipe the tube with a dry non-woven cloth. Do not use acid-base detergent, alcohol, diluent, or gasoline. Clean with a solvent such as a nail remover.
  2. Turn off the power supply after each use and clean it with a damp towel.
  3. Store this device in a safe dry place.
  4. Do not leave the cup idle with water residue.
  5. Do not use a hard brush to wipe.
  6. Do not use water and other liquids directly on the the device for cleaning.
  7. When the device is idle for a long time, please charge the device frequently to ensure its normal operation.

Please do not store in the following areas or under the following conditions:

  • Places vulnerable to vibration and impact Places with direct sunlight
  • Hot and humid places
  • Places with water
  • Places with strong electromagnetic fields Near fireworks
  • Places easily accessible to children
  • Hot locations

REMINDER:

  1. When using the Cup for the first time, pay attention to the step-by- step adjustment to find a suitablme mode and intensity.
  2. If the pressure is too high during the deep negative pressure mode, please press the pressure relief/pause button to relieve pressure to avoid skin discomfort.

We also suggest you read our FAQ page!

Got any other question?

Don't hesitate to contact our customer service at any time and we will get back to you within 24 hours at most.